Thaka Ai | USB cable winding card
بطاقة لف كابل USB

Dimensions XYZ / الأبعاد: 80.000 × 35.000 × 3.000 mm
Low-voltage cable storage; use a loose figure-eight and respect the cable bend radius.
تخزين كابل منخفض الجهد بلف رخْو على شكل 8 مع احترام نصف قطر الانحناء.

PRINT WORKFLOW / خطوات الطباعة
1. Open SCAD, edit only named top-level parameters, render the full model, export STL.
افتح SCAD وعدل المعلمات المسماة بالأعلى ثم صير المجسم كاملًا وصدر STL.
2. Import STL in millimetres at 100%; verify XYZ against this record and the real accessory.
استورد بالمليمتر وبمقياس 100٪ وتحقق من XYZ والقطعة الحقيقية.
3. Use the exact printer/nozzle/filament preset. A 0.4 mm nozzle and 0.2 mm layer are planning examples, not a universal profile.
استخدم إعداد الطابعة والفوهة والخيط الفعلي؛ فوهة 0.4 مم وطبقة 0.2 مم أمثلة تخطيط وليست ملفًا عامًا.
4. Place the broad stable face on the bed. Inspect layers, overhangs, walls and travel before generating machine-specific code.
ضع الوجه العريض الثابت على السرير وافحص الطبقات والبروز والجدران والحركة قبل توليد شيفرة الآلة.
5. Print one, cool, deburr and test fit. Check for cracks, heat deformation and abrasion before use.
اطبع واحدة وبردها وأزل الحواف واختبر الملاءمة وافحص التشقق والتشوه والاحتكاك قبل الاستخدام.
6. Keep away from food/potable water, stoves, live electrical terminals, battery cells, climbing and critical loads.
أبعد عن الغذاء وماء الشرب والمواقد وأطراف الكهرباء والخلايا والتسلق والأحمال الحرجة.

The STL has been checked for closed mesh edges and positive volume; it has not been physically printed or field-certified.
فُحص انغلاق الشبكة وحجمها الموجب ولم تُطبع فعليًا أو تعتمد ميدانيًا.

Material: use a printer-supported material and temperature profile suited to the actual conditions. PETG is a practical candidate for many dry accessories; verify service temperature. PLA can deform in hot cars/desert sun. Neither label is food/water approval.
المادة: استخدم مادة وحرارة يدعمهما المصنع وتناسبان الظروف؛ PETG مرشح عملي لملحقات جافة مع التحقق من حرارة الخدمة وقد يتشوه PLA في المركبة الحارة أو شمس الصحراء ولا يثبت الاسم اعتماد الغذاء أو الماء.

CC0 1.0 applies to original geometry only; no universal G-code is supplied.
يسري CC0 1.0 على الهندسة الأصلية فقط ولا ترفق شيفرة G-code عامة.
